alloymap.Ounce Works ↗

Back to AlloyMap

370 EZCast

370 EZCast (Alcoa) | High-pressure vacuum die casting

Manufacturer-reported values. Do not use as certified design allowables. View sources ↗

TemperWallYield MPaTensile MPaElong. %
FNot specified105–140250–2807.5–13
T5Not specified150–220245–3105.5–10
T4Not specified100–120205–23518–23
T6Not specified135–250195–3007–16

F condition: Manufacturer-reported achievable ranges for typical thin-walled vacuum HPDC components. The source says properties strongly depend on the casting process; exact wall thickness and sample distribution are not reported.

T5 condition: Manufacturer-reported achievable ranges for typical thin-walled vacuum HPDC components. The source says properties strongly depend on the casting process; exact wall thickness and sample distribution are not reported.

T4 condition: Manufacturer-reported achievable ranges for typical thin-walled vacuum HPDC components. The source says properties strongly depend on the casting process; exact wall thickness and sample distribution are not reported.

T6 condition: Manufacturer-reported achievable ranges for typical thin-walled vacuum HPDC components. The source says properties strongly depend on the casting process; exact wall thickness and sample distribution are not reported.

Chemical composition

Reported weight-percent bounds. A blank lower bound means only an upper threshold was reported.

Alcoa reports wt.% ranges and inclusive maxima (single values). Chemistry and heat treatment can be customized; the sheet values are not universal certified limits.

Element / source labelMinimum wt%Upper wt%
Si6.09.0
Fe—0.2
Mn0.10.8
Mg0.150.8
Ti—0.2
Sr—0.025
Others Each—0.05
Others Total—0.15

Physical and thermal properties

PropertyReported valueUnitCondition
density2.64g/cm³typical; temperature not reported
young modulus70–74GPatypical; temperature not reported
thermal conductivity135–170W/(m·K)typical; temperature not reported
solidification range552–608°Ctypical; source prints 608–552 °C

Processing properties

Source-reported comparisons, not certified limits.

PropertyReported value
castabilityGood castability; reduced die sticking
weldabilityExcellent weldability
corrosion resistanceExcellent corrosion resistance

Evidence

Alcoa Specialty Alloys: 370 EZCast Technical Data — Alcoa Corporation

Show the exact source location for each value

Current official product page