alloymap.Ounce Works ↗

Back to AlloyMap

C891F

EZCastPlus (Alcoa) | High-pressure vacuum die casting

Manufacturer-reported values. Do not use as certified design allowables. View sources ↗

TemperWallYield MPaTensile MPaElong. %
FNot specified1552888.3
T6Not specified3003578.3

F condition: Manufacturer-reported typical single values after water quench. Properties strongly depend on casting process; exact wall thickness and sample distribution are not reported. These are not means or ranges.

T6 condition: Manufacturer-reported typical single values after water quench. Properties strongly depend on casting process; exact wall thickness and sample distribution are not reported. These are not means or ranges.

Chemical composition

Reported weight-percent bounds. A blank lower bound means only an upper threshold was reported.

Element / source labelMinimum wt%Upper wt%
No reviewed composition claim for this record.

Physical and thermal properties

PropertyReported valueUnitCondition
density2.67g/cm³typical; temperature not reported
young modulus70–74GPatypical; temperature not reported
thermal expansion21.5μm/(m·K)typical; 20–300 °C
thermal conductivity135–170W/(m·K)typical; temperature not reported
solidification range510–600°Ctypical; source prints 600–510 °C

Processing properties

Source-reported comparisons, not certified limits.

PropertyReported value
weldabilityHigh-quality weld shown between C891F EZCastPlus cast node and 6082 extrusion tube sheet

Evidence

Alcoa Specialty Alloys: C891F EZCastPlus Technical Data — Alcoa Corporation

Show the exact source location for each value

Current official product page

Original developer announcement