alloymap.Ounce Works ↗

Back to AlloyMap

1050

AA 1050 | Wrought alloy; Yieh sheet covers sheet and coil

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.25
Fe—0.4
Cu—0.05
Mn—0.05
Mg—0.05
Ti—0.03
Others (each)—0.03

1050 specification limits, wt.%. Seven uncontested bounds match the AA, United Aluminum and Yieh official rows; these publications are not independent chemical assays. AA 1050A is distinct. Zinc is withheld: AA/United 0.05 max versus Yieh PDF 0.10 max and Yieh HTML 0.05. The Yieh PDF prints Al 99.50 without a minimum label, so no Al minimum is inferred. AA V 0.05 is not present in the other two rows. Temper/thickness-scoped properties remain in discovery and are not generalized.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

United Aluminum Technical Manual 2022 — United Aluminum Corporation

1050 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

Show the exact source location for each value

Official issuer page