alloymap.Ounce Works ↗

Back to AlloyMap

1060

AA 1060 | Wrought alloy; Yieh sheet covers sheet and coil

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Al99.60 min—
Si—0.25
Fe—0.35
Cu—0.05
Mn—0.03
Mg—0.03
Zn—0.05
Ti—0.03
Others (each)—0.03

1060 specification limits, wt.%. Nine bounds match AA, United Aluminum and Yieh official rows; these are three issuer publications, not independent chemical assays. Al 99.60 is a minimum, with no specified maximum. AA Teal footnote 4 on PDF p.24 explains calculation of unalloyed Al content by difference from other analyzed elements. AA and Yieh print V 0.05 max but United does not, so V is withheld; Others total is blank or dashed. Temper/thickness-scoped properties remain in discovery.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

United Aluminum Technical Manual 2022 — United Aluminum Corporation

1060 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

Show the exact source location for each value

Official issuer page