alloymap.Ounce Works ↗

Back to AlloyMap

1070

AA 1070 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.2
Fe—0.25
Cu—0.04
Mn—0.03
Mg—0.03
Zn—0.04
Ti—0.03
Others (each)—0.03
Al99.7—

Exact 1070 chemical composition limits, wt.%, from three official issuer tables. United expressly republishes Aluminum Association limits, and Truer cites ISO 209 or GB/T 3190; these are matching specification publications, not three independent chemical assays or delivered-powder measurements. Single upper numbers are maxima. Al 99.70 is a stated minimum, not a calculated balance. AA 1070A is a different designation. V 0.05 appears in AA and Truer but is omitted by United, so it is withheld from the three-source claims.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Aluminium and its alloys, Technical Data — Shanghai Truer Industrial Development Co., Ltd

United Aluminum Technical Manual 2022 — United Aluminum Corporation

Show the exact source location for each value

Official issuer page