alloymap.Ounce Works ↗

Back to AlloyMap

3004

AA 3004 | Wrought alloy; issuer product sheets cover sheet and coil

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.3
Fe—0.7
Cu—0.25
Mn1.01.5
Mg0.81.3
Zn—0.25
Others (each)—0.05
Others (total)—0.15

3004 specification limits, wt.%. Eight elemental/residual limits match the AA, BlueScope Distribution and Yieh official rows. These are three issuer publications, not independent assays. Cr and Ti are unlisted/dashed, not zero; Al is remainder, not a calculated minimum. 3004A is a distinct designation. Mechanical, thermal, processing and dimensional data remain source/condition scoped in discovery until separate claim review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Aluminium 3004 Data Sheet — BlueScope Distribution Pty Ltd

3004 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

Show the exact source location for each value

Official issuer page