alloymap.Ounce Works ↗

Back to AlloyMap

3005

AA 3005 | Wrought alloy; Alumeco sheet covers coated sheet and strip

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.6
Fe—0.7
Cu—0.3
Mn1.01.5
Mg0.20.6
Cr—0.1
Zn—0.25
Ti—0.1
Others (each)—0.05
Others (total)—0.15

3005 specification limits, wt.%. Ten elemental/residual bounds match the AA, United Aluminum and Alumeco official rows. These are three issuer publications, not independent chemical assays. 3005A is a distinct designation. Al is remainder, not an inferred minimum. Alumeco mechanical data is coated-sheet/strip and temper/thickness scoped; physical values are source-specific, and neither is generalized here.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

EN AW-3005 Coated Sheet and Strip Datasheet — Alumeco ApS

United Aluminum Technical Manual 2022 — United Aluminum Corporation

Show the exact source location for each value

Official issuer page