alloymap.Ounce Works ↗

Back to AlloyMap

5005

AA 5005 | Wrought alloy; sheet/coil issuer publications support the listed composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.3
Cu—0.2
Mn—0.2
Mg0.51.1
Cr—0.1
Zn—0.25
Others (each)—0.05
Others (total)—0.15

Partial 5005 composition, wt.%. Fe is deliberately withheld: the AA registered row, BlueScope and Yieh show 0.70 max, but an Austral Wright official catalogue PDF prints 0.07 max while its current official web page shows 0.70 max. The inconsistency has not been resolved with the issuer. Ti has no listed numeric limit; Al is remainder, not a calculated minimum. The eight displayed limits are matching specification publications from three issuer groups, not independent chemical assays. Temper-specific mechanical and condition-specific thermal/physical data are staged separately pending claim review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Aluminium 5005 Data Sheet — BlueScope Distribution

5005 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

Show the exact source location for each value

Official issuer page