alloymap.Ounce Works ↗

Back to AlloyMap

5005A

AA 5005A | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.3
Fe—0.45
Cu—0.05
Mn—0.15
Mg0.71.1
Cr—0.1
Zn—0.2
Others (each)—0.05
Others (total)—0.15

Exact AA 5005A wt.% composition limits agree with the Elisental EN AW-5005A wire and Bronmetal EN AW-5005A rolled-alloy tables. 5005 and 5005A are distinct registered designations. These are three issuer publications of specification limits, not independent assays or delivered-product measurements; supplier tables cite or restate European standard limits. Single numbers are maxima. AA footnote 3 defines Others (total). Al is remainder without a numeric minimum. Diameter- and temper-scoped wire mechanics are held for separate review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Aluminium laminate - Alloys — Bronmetal

Aluminium wire EN AW-5005A, short version, Rev. 0326 — Drahtwerk Elisental W. Erdmann GmbH & Co.

Show the exact source location for each value

Official issuer page