alloymap.Ounce Works ↗

Back to AlloyMap

5052

AA 5052 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No complete reviewed mechanical condition. Separately reviewed property observations appear below.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.25
Fe—0.4
Cu—0.1
Mn—0.1
Mg2.22.8
Cr0.150.35
Zn—0.1
Others (each)—0.05
Others (total)—0.15

AA registered 5052 wt.% composition limits are corroborated by Smiths Advanced Metals and BlueScope Distribution supplier tables. Elisental EN AW-5052 wire independently confirms eight of the nine numeric fields. Its Cr cell literally prints an inconsistent inequality with a range (<= 0,15-0,35), so that source is excluded for Cr; the AA, Smiths and BlueScope rows clearly support 0.15-0.35 wt.% Cr. These are issuer publications of specification limits, not independent assays. Ti is unspecified, not zero. Al is remainder without an invented numeric minimum. One 5052-O rolled-sheet tensile specification interval is reviewed separately below. Yield, elongation, wire, thermal, electrical and bending values remain source-specific and unpublished pending condition-level review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Additional property data

Source-reported values, specification intervals, minimums and strict bounds; an average is labeled only when the source reports it. Compare conditions before use.

PropertyValueCondition
ultimate tensile strength170–215 MPa5052-O annealed flat-rolled sheet/coil; thickness >1.2 to 6.0 mm (Yieh/BlueScope scope overlap; Austral Wright row has no thickness split); published specification range, not measured scatter

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Aluminium Product Catalogue, Aluminium 5052 product data sheet — Austral Wright Metals

Aluminium 5052 Data Sheet — BlueScope Distribution Pty Ltd

Aluminium wire EN AW-5052, short version, Rev. 0326 — Drahtwerk Elisental W. Erdmann GmbH & Co.

5052 Aluminium Sheet, technical datasheet — Smiths Advanced Metals

5052 Aluminum Alloy Coil / Sheet, Technical Data Sheet — Yieh Corporation Limited

Show the exact source location for each value

Official issuer page