5083

Name: 5083 aluminum alloy properties and sources
Creator: AlloyMap

AA 5083 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source label	Minimum wt%	Upper wt%
Si	—	0.4
Fe	—	0.4
Cu	—	0.1
Mn	0.4	1.0
Mg	4.0	4.9
Cr	0.05	0.25
Zn	—	0.25
Ti	—	0.15
Others (each)	—	0.05
Others (total)	—	0.15

AA registered 5083 chemical composition limits, wt.%, corroborated by BIKAR and Alumeco issuer publications. The supplier tables report EN 573-3 chemistry, rather than independent chemical assays or acquired standards text. Single upper numbers are inclusive maxima. Physical and mechanical observations remain unpublished pending condition-specific review.

Physical and thermal properties

Property	Reported value	Unit	Condition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

EN AW 5083 Rolled Products, Data Sheet — Alumeco A/S

EN AW-5083 alloy data sheet — BIKAR METALS GmbH

Show the exact source location for each value

Official issuer page