alloymap.Ounce Works ↗

Back to AlloyMap

5182

AA 5182 | Wrought alloy; supplier documents discuss strip, sheet and can-end stock

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.2
Fe—0.35
Cu—0.15
Mn0.20.5
Mg4.05.0
Cr—0.1
Zn—0.25
Ti—0.1
Others (each)—0.05
Others (total)—0.15

5182 specification limits, wt.%. Ten elemental/residual bounds match the AA, United Aluminum and Macsteel issuer rows. These are three publications of specification limits, not independent assays. 5181 is distinct. Al is remainder, not a calculated minimum. Macsteel physical-property labels/units are inconsistent and are withheld; mechanical properties remain source- and condition-scoped in discovery pending separate review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Macsteel VRN Product Catalogue June 2025 — Macsteel VRN

United Aluminum Technical Manual 2022 — United Aluminum Corporation

Show the exact source location for each value

Official issuer page