alloymap.Ounce Works ↗

Back to AlloyMap

5754

AA 5754 / EN AW-5754 | Wrought alloy; source publications cover multiple product forms and tempers

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.4
Fe—0.4
Cu—0.1
Mn—0.5
Mg2.63.6
Cr—0.3
Zn—0.2
Ti—0.15
Others (each)—0.05
Others (total)—0.15
Mn+Cr (combined)0.10.6

5754 specification limits, wt.%. Ten elemental/residual bounds are visually matched across four issuer groups: AA, BIKAR, Yieh and thyssenkrupp. An additional combined Mn+Cr sum constraint, 0.10-0.60 wt.%, is separately confirmed by AA, BIKAR and thyssenkrupp; Yieh does not print it and is not counted as its attestation. Mn+Cr is a combined constraint, not a chemical element. These are publications of specification limits, not four independent assays. Al is remainder, not a calculated minimum. Mechanical, physical and process properties remain source- and condition-scoped in discovery until claim review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

EN AW-5754 Al Mg3, Complete Data Sheet — BIKAR METALS GmbH

EN AW-5754 Aluminium Alloy Material Data Sheet, MX/TIS_06.2017 — thyssenkrupp Materials Services GmbH

5754 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

Show the exact source location for each value

Official issuer page