alloymap.Ounce Works ↗

Back to AlloyMap

6005A

AA 6005A | Wrought aluminum; matching chemistry only

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si0.50.9
Fe—0.35
Cu—0.3
Mn—0.5
Mg0.40.7
Cr—0.3
Zn—0.2
Ti—0.1
Mn+Cr (combined)0.120.5
Others (each)—0.05
Others (total)—0.15

Eleven AA 6005A wt.% chemistry limits agree across AA Teal, Anodall EN 573-3-derived, and McKechnie AS/NZS 1866-derived publications. These are three issuer publications, not independent melt analyses. Mn+Cr is one combined range, not individual element minima. Single numbers are maxima; Al remainder is not a numeric minimum. Product mechanical rows remain unpublished pending condition-level review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Anodall ALLOY EN AW 6005A technical sheet — Anodall Extrusion S.p.A.

Alloy 6005A Extrusion Data — McKechnie Aluminium Solutions Ltd

Show the exact source location for each value

Official issuer page