alloymap.Ounce Works ↗

Back to AlloyMap

6061

AA 6061 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si0.40.8
Fe—0.7
Cu0.150.4
Mn—0.15
Mg0.81.2
Cr0.040.35
Zn—0.25
Ti—0.15
Others (each)—0.05
Others (total)—0.15

AA registered 6061 chemical composition limits, wt.%, corroborated by United Aluminum and Yieh issuer publications. United labels its table AA-derived; these publications are not independent assays. Single upper numbers are inclusive maxima, and Al is remainder without an invented numeric limit. Yieh coil/sheet mechanical and physical data are condition-scoped candidates, not generic AA values.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

United Aluminum Technical Manual 2022 — United Aluminum Corporation

6061 Aluminum Alloy Coil / Sheet, Technical Data Sheet — Yieh Corporation Limited

Show the exact source location for each value

Official issuer page