alloymap.Ounce Works ↗

Back to AlloyMap

6063

AA 6063 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Fe—0.35
Cu—0.1
Mn—0.1
Mg0.450.9
Cr—0.1
Zn—0.1
Ti—0.1
Others (each)—0.05
Others (total)—0.15

Nine non-Si AA registered 6063 wt.% limits agree across AA Teal, Alumeco and Yieh issuer publications. These repeat specification limits, not independent chemical assays. Si remains unpublished because a separate tube/pipe publication conflicts on its minimum. A contradictory Anodall AA designation was not used. Mechanical and physical values remain unpublished pending condition-level review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

EN AW 6063 Profiles, Data Sheet — Alumeco A/S

Yieh Aluminum Profile catalogue, 6063 composition row — Yieh Corp.

Show the exact source location for each value

Official issuer page