alloymap.Ounce Works ↗

Back to AlloyMap

6082

AA 6082 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si0.71.3
Fe—0.5
Cu—0.1
Mn0.41.0
Mg0.61.2
Cr—0.25
Zn—0.2
Ti—0.1
Others (each)—0.05
Others (total)—0.15

AA registered 6082 wt.% composition limits are corroborated by Anodall and Alumeco issuer publications. Their chemistry cites EN 573-3; these are issuer publications, not independent assays or acquired EN text. Single upper values are maxima and Al remains remainder. Mechanical and physical observations remain unpublished pending condition review.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

EN AW 6082 Rolled Products, Data Sheet — Alumeco A/S

Anodall ALLOY EN AW 6082 technical sheet — Anodall Extrusion S.p.A.

Show the exact source location for each value

Official issuer page