alloymap.Ounce Works ↗

Back to AlloyMap

6101

AA 6101 | Wrought alloy; product form and temper not specified for composition

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si0.30.7
Fe—0.5
Cu—0.1
Mn—0.03
Cr—0.03
Zn—0.1
B—0.06
Others (each)—0.03
Others (total)—0.1

Nine AA registered 6101 chemical composition limits, wt.%, confirmed in Aluminum Association, Alfiniti and Australian Aluminium Council issuer publications. These repeat specification limits, not independent chemical assays. The Council magnesium cell prints a malformed double dash and is not used to attest a range. Earlier mechanical rows lack permitted condition-matched evidence and remain unpublished. 6101A and 6101B are distinct designations.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Rolled Products Manual, January 2024 — Australian Aluminium Council

6101 Chemical Composition Limits, Alfiniti technical sheet — Alfiniti, Inc.

Show the exact source location for each value

Official issuer page