Gränges Endure 8011A
Gränges Endure 8011A (branded closure sheet) | Thin-gauge closure sheet for caps; thickness not specified in data sheet
Manufacturer-reported values. Do not use as certified design allowables. View sources ↗
| Temper | Wall | Yield MPa | Tensile MPa | Elong. % |
|---|---|---|---|---|
| H14 · Thin-gauge closure sheet; thickness not reported; delivery condition | Not specified | 110–150 | 125–165 | ≥ 2 |
| H14 · Thin-gauge closure sheet; thickness not reported; after painting simulation at 205°C for 20 min | Not specified | 90–130 | 110–150 | ≥ 3 |
Chemical composition
Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.
These values describe the branded Gränges Endure 8011A closure-sheet product, not every generic AA 8011A. The issuer sheet prints explicit Fe and Si ranges. Its six other chemical cells are single numbers without a printed maximum or minimum qualifier, so no bounds are inferred from them. H14 delivery and 205°C/20min after-painting-simulation mechanical rows are separate supplier conditions; sheet thickness and mechanical test temperature are not reported. The earing value is an inclusive maximum, not a typical point. The carbon footprint and recycled-content statements are product sustainability criteria and are not generic alloy properties.
| Element / source label | Minimum wt% | Upper wt% |
|---|---|---|
| Fe | 0.5 | 1.0 |
| Si | 0.4 | 0.8 |
Physical and thermal properties
| Property | Reported value | Unit | Condition |
|---|---|---|---|
| No reviewed physical or thermal claim for this record. | |||
Additional property data
Source-reported values, specification intervals, minimums and strict bounds; an average is labeled only when the source reports it. Compare conditions before use.
| Property | Value | Condition |
|---|---|---|
| earing | ≤ 2 % | Thin-gauge closure sheet; thickness not reported; H14 delivery condition |
Evidence
Gränges Endure 8011A data sheet — Gränges AB
Show the exact source location for each value
- granges-endure-8011a-h14-delivery — PDF p. 1, Gränges Endure 8011A H14 delivery-condition mechanical row ↗
- granges-endure-8011a-h14-after-painting — PDF p. 1, Gränges Endure 8011A H14 after-painting mechanical row, 205°C/20min ↗
- Fe — PDF p. 1, Gränges Endure 8011A chemical table, Fe column ↗
- Si — PDF p. 1, Gränges Endure 8011A chemical table, Si column ↗
- earing — PDF p. 1, Gränges Endure 8011A H14 delivery-condition earing column ↗