alloymap.EnglishOunce Works ↗

AlloyMap 홈으로

1100

AA 1100 | Wrought alloy; Yieh sheet covers sheet and coil

모든 값은 공신력 있는 발행기관 3곳 이상의 문서에서 확인했습니다. 일부 발행기관은 같은 표준을 그대로 옮겨 싣기 때문에, 이 값들은 서로 독립된 시험이 아닙니다. 인증된 설계 허용값으로 사용하지 마세요. 출처 보기 ↗

출처 문서의 제목과 조건 설명은 출처 언어 그대로, 공정 항목의 값·보류 사유·검토 메모는 영어 그대로 표시하며 번역하지 않습니다. 숫자, 단위, 질별, 합금 지정도 번역하지 않습니다.

이 기록에는 검토를 마친 기계적 물성 값이 없습니다.

화학 조성

검토를 마친 질량 백분율(wt%) 한계만 표시합니다. 비어 있는 한계는 다른 쪽 한계만 보고되었다는 뜻입니다.

원소 / 출처 표기하한 wt%상한 wt%
Si+Fe (combined)—0.95
Cu0.050.2
Mn—0.05
Zn—0.1
Others (each)—0.05
Others (total)—0.15

Partial AA 1100 specification limits, wt.%. Six bounds agree in the AA Teal Sheets, United Aluminum manual, and Yieh coil/sheet TDS. These are three issuer publications, not independent chemical assays; United states its composition table is according to AA. The Si+Fe 0.95 maximum is one combined bound, not separate Si and Fe maxima. Al is withheld: AA and United print 99.00 minimum, whereas Yieh's composition table prints 99.10 minimum despite its own introductory prose saying 99.0. Dashes do not establish zero limits for Mg, Cr, or Ti. Physical, thermal, electrical, mechanical, dimensional, and processing tables in the Yieh PDF remain source-scoped discovery pending matched-condition review.

물리·열 물성

물성보고된 값단위조건
밀도2.71g/cm³AA 1100 at 20 °C; Yieh coil/sheet, Austral Wright flat products, and Coppermetal catalog. Temper and measurement method are not jointly stated. Supplier-reported value, not a design tolerance.

검토 중인 데이터

Composition Al 보류: AA Teal Sheets and United Aluminum print Al 99.00 min; Yieh composition table prints 99.10 min, while its introductory paragraph says 99.0. The discrepancy is unresolved, so no Al minimum is published.

Teal Sheets, December 2025 ↗ — printed p. 1 / PDF p. 7, registered 1100 row, Al minimum column

1100 Aluminum Alloy Coil / Sheet Technical Data Sheet ↗ — PDF p. 1, 1100 coil/sheet Chemical Composition, Aluminum row

근거

Teal Sheets, December 2025 — The Aluminum Association

Aluminium Product Catalogue, Aluminium 1100 product data sheet — Austral Wright Metals

Aluminum Catalog, Physical Properties of Aluminium, part 1/2 — Coppermetal Comércio de Aços e Metais Ltda

United Aluminum Technical Manual 2022 — United Aluminum Corporation

1100 Aluminum Alloy Coil / Sheet Technical Data Sheet — Yieh Corp.

값마다 정확한 출처 위치 보기

공식 발행기관 페이지