alloymap.Ounce Works ↗

Back to AlloyMap

1350

AA 1350 | Wrought aluminum; electrical conductor alloy (formerly EC)

Each value is checked in at least three authoritative issuer publications. Some issuers reproduce a shared standard; these are not independent experiments. Do not use as certified design allowables. View sources ↗

No reviewed mechanical claim for this record.

Chemical composition

Only reviewed weight-percent bounds are listed. A blank bound means only the other threshold was reported.

Element / source labelMinimum wt%Upper wt%
Si—0.1
Fe—0.4
Cu—0.05
Mn—0.01
Cr—0.01
Zn—0.05
B—0.05
V+Ti (combined)—0.02
Others (each)—0.03
Others (total)—0.1

Ten AA registered 1350 chemical composition limits, wt.%, confirmed in Aluminum Association, United Aluminum and Australian Aluminium Council issuer publications. These repeat specification limits, not independent chemical assays. V+Ti is one combined maximum. Ga is absent from the Council row; its aluminium-content cell does not explicitly mark a minimum. Both numerical bounds remain unpublished. No source-specific physical or mechanical property is generalized to this grade.

Physical and thermal properties

PropertyReported valueUnitCondition
No reviewed physical or thermal claim for this record.

Evidence

Teal Sheets, December 2025 — The Aluminum Association

Rolled Products Manual, January 2024 — Australian Aluminium Council

United Aluminum Technical Manual 2022 — United Aluminum Corporation

Show the exact source location for each value

Official issuer page