alloymap.EnglishOunce Works ↗

AlloyMap 홈으로

1350

AA 1350 | 가공용 알루미늄; 전기 도체용 합금 (구 EC)

모든 값은 공신력 있는 발행기관 3곳 이상의 문서에서 확인했습니다. 일부 발행기관은 같은 표준을 그대로 옮겨 싣기 때문에, 이 값들은 서로 독립된 시험이 아닙니다. 인증된 설계 허용값으로 사용하지 마세요. 출처 보기 ↗

출처 문서의 제목과 조건 설명은 출처 언어 그대로, 공정 항목의 값·보류 사유·검토 메모는 영어 그대로 표시하며 번역하지 않습니다. 숫자, 단위, 질별, 합금 지정도 번역하지 않습니다.

이 기록에는 검토를 마친 기계적 물성 값이 없습니다.

화학 조성

검토를 마친 질량 백분율(wt%) 한계만 표시합니다. 비어 있는 한계는 다른 쪽 한계만 보고되었다는 뜻입니다.

원소 / 출처 표기하한 wt%상한 wt%
Si—0.1
Fe—0.4
Cu—0.05
Mn—0.01
Cr—0.01
Zn—0.05
B—0.05
V+Ti (combined)—0.02
Others (each)—0.03
Others (total)—0.1

Ten AA registered 1350 chemical composition limits, wt.%, confirmed in Aluminum Association, United Aluminum and Australian Aluminium Council issuer publications. These repeat specification limits, not independent chemical assays. V+Ti is one combined maximum. Ga is absent from the Council row; its aluminium-content cell does not explicitly mark a minimum. Both numerical bounds remain unpublished. No source-specific physical or mechanical property is generalized to this grade.

물리·열 물성

물성보고된 값단위조건
이 기록에는 검토를 마친 물리·열 물성 값이 없습니다.

근거

Teal Sheets, December 2025 — The Aluminum Association

Rolled Products Manual, January 2024 — Australian Aluminium Council

United Aluminum Technical Manual 2022 — United Aluminum Corporation

값마다 정확한 출처 위치 보기

공식 발행기관 페이지