alloymap.EnglishOunce Works ↗

AlloyMap 홈으로

Peraluman-36

Peraluman-36 / AlMg3Si (RHEINFELDEN ALLOYS) | 사형 주조 및 중력 금형 주조

제조사가 보고한 값입니다. 인증된 설계 허용값으로 사용하지 마세요. 출처 보기 ↗

출처 문서의 제목과 조건 설명은 출처 언어 그대로, 공정 항목의 값·보류 사유·검토 메모는 영어 그대로 표시하며 번역하지 않습니다. 숫자, 단위, 질별, 합금 지정도 번역하지 않습니다.

질별두께항복강도 MPa인장강도 MPa연신율 %
F · Sand casting명시 없음80–100140–1903–8
T6 · Sand casting명시 없음160–220220–2802–8
F · Gravity die casting명시 없음70–100160–2106–14
T6 · Gravity die casting명시 없음160–220250–3005–15

F 조건: Original-supplier performance interval. Sand/gravity data include separately cast and casting-extracted specimens (p. 75). No wall thickness is stated for this main range; bracketed casting minima at wall ≤20 mm are separate observations.

T6 조건: Original-supplier performance interval. Sand/gravity data include separately cast and casting-extracted specimens (p. 75). No wall thickness is stated for this main range; bracketed casting minima at wall ≤20 mm are separate observations.

F 조건: Original-supplier performance interval. Sand/gravity data include separately cast and casting-extracted specimens (p. 75). No wall thickness is stated for this main range; bracketed casting minima at wall ≤20 mm are separate observations.

T6 조건: Original-supplier performance interval. Sand/gravity data include separately cast and casting-extracted specimens (p. 75). No wall thickness is stated for this main range; bracketed casting minima at wall ≤20 mm are separate observations.

화학 조성

검토를 마친 질량 백분율(wt%) 한계만 표시합니다. 비어 있는 한계는 다른 쪽 한계만 보고되었다는 뜻입니다.

Original-supplier branded Peraluman-36 / AlMg3Si. The 2015 overview and 2016 handbook plus current product page are one issuer. Do not generalize these ranges to every AlMg3Si product. Main mechanical ranges have no stated wall thickness; p. 75 limits bracketed casting minima to walls up to 20 mm. Be is unbounded in the other-constituent cell; REACH ingredient disclosures are not ingot specification limits. The 2015 and 2016 %IACS upper bounds disagree (40.0 versus 39.5), so that unit is withheld. Fatigue intervals lack cycle count and stress ratio. No grade-specific T6 heat-treatment cycle is printed.

원소 / 출처 표기하한 wt%상한 wt%
Si0.91.3
Fe—0.15
Cu—0.02
Mn0.010.4
Mg2.73.5
Zn—0.1
Ti0.010.15

물리·열 물성

물성보고된 값단위조건
밀도2.66kg/dm³Supplier physical summary; heat-treatable alloy in heat-treated state; test temperature not separately reported
영률66–74GPaSupplier physical summary; heat-treatable alloy in heat-treated state; test temperature not separately reported
열팽창2410⁻⁶/KSupplier physical summary; heat-treatable alloy in heat-treated state; 20–200 °C
열전도율1.2W/(K·cm)Supplier physical summary; heat-treatable alloy in heat-treated state; 20–200 °C
전기전도도15–23MS/mSupplier physical summary; heat-treatable alloy in heat-treated state; MS/m; temperature not separately reported
선수축률1.1–1.5%Supplier physical summary; heat-treatable alloy in heat-treated state; sand casting; temperature not separately reported
선수축률0.8–1.2%Supplier physical summary; heat-treatable alloy in heat-treated state; gravity die casting; temperature not separately reported
용융·응고 범위560–650°CSupplier melt and solidification range; includes partial-melting onset from segregation in cast structure
밀도2.66g/cm³Manufacturer REACH technical information, 2015 version 2; stated at 20 °C; product form not further specified
용융 범위560–650°CManufacturer REACH technical information, 2015 version 2; modification state and measurement method not stated

추가 물성 데이터

출처가 보고한 값, 규격 구간, 최솟값(이상), 상한(미만 또는 이하)을 표시합니다. 평균은 출처가 평균으로 보고한 경우에만 평균이라고 표기합니다. 사용하기 전에 조건을 비교하세요.

물성값조건
브리넬 경도50–60 HBWSand casting; F; supplier performance range; wall thickness not reported
항복강도≥ 70 MPaSand casting; F; supplier casting minimum at wall thickness ≤20 mm
인장강도≥ 130 MPaSand casting; F; supplier casting minimum at wall thickness ≤20 mm
연신율≥ 3 %Sand casting; F; supplier casting minimum at wall thickness ≤20 mm
브리넬 경도≥ 45 HBWSand casting; F; supplier casting minimum at wall thickness ≤20 mm
피로 저항60–65 MPaSand casting; F; supplier summary; cycle count and stress ratio not reported
브리넬 경도70–90 HBWSand casting; T6; supplier performance range; wall thickness not reported
항복강도≥ 140 MPaSand casting; T6; supplier casting minimum at wall thickness ≤20 mm
인장강도≥ 180 MPaSand casting; T6; supplier casting minimum at wall thickness ≤20 mm
연신율≥ 2 %Sand casting; T6; supplier casting minimum at wall thickness ≤20 mm
브리넬 경도≥ 65 HBWSand casting; T6; supplier casting minimum at wall thickness ≤20 mm
피로 저항75–80 MPaSand casting; T6; supplier summary; cycle count and stress ratio not reported
브리넬 경도50–65 HBWGravity die casting; F; supplier performance range; wall thickness not reported
항복강도≥ 70 MPaGravity die casting; F; supplier casting minimum at wall thickness ≤20 mm
인장강도≥ 160 MPaGravity die casting; F; supplier casting minimum at wall thickness ≤20 mm
연신율≥ 5 %Gravity die casting; F; supplier casting minimum at wall thickness ≤20 mm
브리넬 경도≥ 50 HBWGravity die casting; F; supplier casting minimum at wall thickness ≤20 mm
피로 저항70–80 MPaGravity die casting; F; supplier summary; cycle count and stress ratio not reported
브리넬 경도75–90 HBWGravity die casting; T6; supplier performance range; wall thickness not reported
항복강도≥ 150 MPaGravity die casting; T6; supplier casting minimum at wall thickness ≤20 mm
인장강도≥ 220 MPaGravity die casting; T6; supplier casting minimum at wall thickness ≤20 mm
연신율≥ 5 %Gravity die casting; T6; supplier casting minimum at wall thickness ≤20 mm
브리넬 경도≥ 75 HBWGravity die casting; T6; supplier casting minimum at wall thickness ≤20 mm
피로 저항80–90 MPaGravity die casting; T6; supplier summary; cycle count and stress ratio not reported
발화 온도400 °CManufacturer REACH technical information; dust form only; not a bulk-alloy ignition temperature

검토 중인 데이터

전기전도도 보류: 2015 original-supplier overview gives 26.0–40.0 %IACS; 2016 handbook gives 26.0–39.5 %IACS in the same aligned Peraluman-36 column. Revision or method is unexplained; neither interval is published. The separately concordant 15–23 MS/m column remains published in its own unit and condition.

Aluminium Casting Alloys overview, 2015 — Peraluman-36 ↗ — PDF p. 5, Peraluman-36 2015 physical continuation, electrical conductivity %IACS column

Primary Aluminium Casting Alloys handbook, 2016 — Peraluman-36 ↗ — PDF p. 81, Peraluman-36 2016 physical continuation, electrical conductivity %IACS column

근거

Aluminium Casting Alloys overview, 2015 — Peraluman-36 — RHEINFELDEN ALLOYS GmbH & Co. KG

Peraluman-36 technical information (REACH), 2015 version 2 — RHEINFELDEN ALLOYS GmbH & Co. KG

Primary Aluminium Casting Alloys handbook, 2016 — Peraluman-36 — RHEINFELDEN ALLOYS GmbH & Co. KG

값마다 정확한 출처 위치 보기

공식 발행기관 페이지