alloymap.EnglishOunce Works ↗

AlloyMap 홈으로

VERSA Conduct 1070

Speira product; EN AW-1070A (not AA 1070) | 냉간 압연 코일 및 시트

제조사가 보고한 값입니다. 인증된 설계 허용값으로 사용하지 마세요. 출처 보기 ↗

출처 문서의 제목과 조건 설명은 출처 언어 그대로, 공정 항목의 값·보류 사유·검토 메모는 영어 그대로 표시하며 번역하지 않습니다. 숫자, 단위, 질별, 합금 지정도 번역하지 않습니다.

검토를 마친 완전한 기계적 조건이 없습니다. 별도로 검토한 물성 관측값은 아래에 있습니다.

화학 조성

검토를 마친 질량 백분율(wt%) 한계만 표시합니다. 비어 있는 한계는 다른 쪽 한계만 보고되었다는 뜻입니다.

원소 / 출처 표기하한 wt%상한 wt%
Al99.7—
Si—0.2
Fe—0.25
Cu—0.03
Mn—0.03
Mg—0.03
Ti—0.03
Zn—0.07
Others (each)—0.03

Speira product-sheet chemistry, wt.%; its registered designation is EN AW-1070A. These are sheet maxima/minimums, not measured lot results or universal AA 1070 limits. The older unlinked 05/23 Speira PDF gives different tighter product maxima and is excluded from this edition.

물리·열 물성

물성보고된 값단위조건
밀도2.7g/cm³typical literature value; temperature and temper not given
영률69GPatypical literature value; temperature and temper not given
전단 탄성계수26GPatypical literature value; temperature and temper not given
비열0.92J/(g·K)typical literature value; temperature and temper not given
용융 범위645–660°Ctypical literature range; no specific lot
열팽창24µ/Ktypical literature value over 20–100 °C; temper not given
열전도율235W/(m·K)typical literature value at 20 °C; temper not given
전기전도도36.0–36.6MS/mtypical literature interval; temperature and temper not given

가공 특성

출처가 보고한 비교이며 인증된 한계값이 아닙니다.

물성보고된 값
coil available dimensionscoil: thickness 0.3-3.0 mm, width at most 1500 mm; some combinations may not be available
sheet available dimensionssheet: thickness 0.5-3.0 mm, width at most 1500 mm, length 500-4000 mm; some combinations may not be available

추가 물성 데이터

출처가 보고한 값, 규격 구간, 최솟값(이상), 상한(미만 또는 이하)을 표시합니다. 평균은 출처가 평균으로 보고한 경우에만 평균이라고 표기합니다. 사용하기 전에 조건을 비교하세요.

물성값조건
항복강도≥ 15 MPaSpeira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
항복강도25 MPaSpeira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
인장강도≥ 60 MPaSpeira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
인장강도65 MPaSpeira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
브리넬 경도19 HB (scale unspecified)Speira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; informational only
인장강도≤ 90 MPaSpeira cold-rolled coil/sheet, O temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; maximum
항복강도≥ 55 MPaSpeira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
항복강도90 MPaSpeira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
인장강도≥ 80 MPaSpeira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
인장강도95 MPaSpeira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
브리넬 경도28 HB (scale unspecified)Speira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; informational only
인장강도≤ 120 MPaSpeira cold-rolled coil/sheet, H12 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; maximum
항복강도≥ 70 MPaSpeira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
항복강도95 MPaSpeira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
인장강도≥ 100 MPaSpeira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
인장강도105 MPaSpeira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
브리넬 경도32 HB (scale unspecified)Speira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; informational only
인장강도≤ 140 MPaSpeira cold-rolled coil/sheet, H14 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; maximum
항복강도≥ 90 MPaSpeira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
항복강도105 MPaSpeira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
인장강도≥ 110 MPaSpeira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
인장강도115 MPaSpeira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
브리넬 경도34 HB (scale unspecified)Speira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; informational only
인장강도≤ 150 MPaSpeira cold-rolled coil/sheet, H16 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; maximum
항복강도≥ 105 MPaSpeira cold-rolled coil/sheet, H18 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
항복강도120 MPaSpeira cold-rolled coil/sheet, H18 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
인장강도≥ 125 MPaSpeira cold-rolled coil/sheet, H18 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; minimum
인장강도130 MPaSpeira cold-rolled coil/sheet, H18 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; typical
브리넬 경도36 HB (scale unspecified)Speira cold-rolled coil/sheet, H18 temper; source gives a 0.3–3.0 mm coil and 0.5–3.0 mm sheet catalog envelope, but no thickness for this row; test temperature and sample count not stated; informational only
전기전도도63.0 % IACSsoft annealed O temper; manufacturer-reported typical; temperature not stated
전기전도도(equivalent)36.54 MS/msoft annealed O temper; source-stated equivalent of typical 63 % IACS, not a separate assay
비저항(equivalent)0.027367 Ω·mm²/msoft annealed O temper; source-stated equivalent of typical 63 % IACS, not a separate assay
전기전도도≥ 62.7 % IACSsoft annealed O temper; manufacturer-reported minimum; temperature not stated

근거

VERSA Conduct 1070 Material Data Sheet, issuer-linked undated edition — Speira AS

값마다 정확한 출처 위치 보기

공식 발행기관 페이지